RF4 RF-FT01 2-in-1 Mini Repair Fixture

2-in-1 Mini Repair Fixture for Board Holding and Tool Sharpening

The RF4 RF-FT01 is a 2-in-1 mini repair fixture that does two jobs on one bench. It clamps chips and motherboards, and it carries a built-in sharpening stone for blades and tweezers. You hold the board steady with the clamp. You restore a dull tweezer tip with the stone. Both tasks sit within arm’s reach, so you stop hunting for loose tools mid-repair. RF4 builds this fixture for technicians who work on small boards and fine tips every day.

Clamping Chips and Motherboards

A board that shifts while you work costs you pads. The RF-FT01 clamps the chip or motherboard in place, so both hands stay free for the tweezers, flux, and soldering iron. Use it on a dead phone board during diagnostics, or on a logic board during IC change karna.

Pair the fixture with a soldering station or hot air station and your rework stays steady from start to finish. RF4 sells it as a mini fixture, so match your board size to the clamp opening before you commit. Check that fit first and you avoid a bad surprise at the bench.

Built-In Sharpening Stone

Dull tweezers slip off tiny components, and a worn blade tears pads and flex cables. The RF-FT01 puts a sharpening stone inside the fixture body. You restore the edge of a blade or the tip of a tweezer in seconds, right where you work.

That saves you a separate stone, a trip to the drawer, and the time you lose when a tool fails mid-job. Keep your tweezer tips fine and your pickup cleaner on every repair, whether the phone has a charging issue, a display problem, or a boot loop issue.

Where It Fits in Your Repair Workflow

The fixture belongs at the start of any hands-on board job. Clamp the board before you touch the iron, the hot air gun, or the multimeter probes. A held board gives you cleaner readings, steadier rework, and safer chip removal.

Add it to a bench that already runs a microscope, a reballing kit, and a PCB holder, and it covers the small jobs those tools leave open. Repair shops, service centers, and training institutes in Pakistan use compact fixtures like this because they cost little bench space and still cover the daily workload. Browse the RF4 fixtures and PCB stands category to compare the RF-FT01 against larger holders when your board sizes grow.