RF4 RF-FO22 360° Double Arm Microscope Bracket

Double Arm Microscope Bracket Built for Daily Board Work

The RF4 RF-FO22 is a double arm microscope bracket that moves your stereo microscope to the exact spot where the board sits. The aerospace-grade aluminium body, 32 mm column fit and 360° free rotation hold position through long sessions of jumper lagana, IC change karna and PCB inspection. A repair bench runs the microscope all day, and a short or loose arm wastes time on every dead phone. The RF-FO22 solves that with long reach and a firm lock.

Key Technical Highlights

The dual-rail, double-arm layout spreads the load across two guides instead of one pivot. That cuts sag and drift when you tilt the head over a board. The horizontal arm reaches up to 390 mm and the vertical height measures 370 mm. The column diameter is 32 mm, so match your microscope head holder to that figure before you order.

The circular base measures 95 mm across and anchors the bracket to your bench. Load capacity reaches 20 kg, which covers standard stereo microscope heads with room to spare. Rotation runs a full 360°. You swing the scope away to load a board, then swing it back to the same working position.

Repair Workflow Fit

Board repair rarely stays in one spot. You diagnose a hardware fault under the microscope, move to the hot air station for IC removal, then return to the scope to check pads and clean up. The RF-FO22 supports that loop. The long arm clears your soldering station and PCB holder, so you do not drag the whole bench around the microscope.

Reballing and BGA rework demand a steady view. A microscope that creeps while you align a stencil ruins the job. The double arm keeps the head still once you lock it. You also get a clear line of sight for charging issue repairs, display problem checks on flex connectors, and tracing network issue faults around RF components.

Multimeter probing under magnification works the same way. You position the scope, lock it, and keep both hands on the probes.

Why Technicians Choose This Stand

A fixed pillar stand limits you to one reach and one angle. The RF-FO22 gives you horizontal travel and full rotation, so one microscope covers a wide bench area. That matters in Pakistani repair shops where bench space is tight and one technician handles software and hardware jobs on the same table.

Aluminium keeps the weight down without giving up rigidity. You mount it, set it, and stop adjusting. Pair it with your microscope head and holder, a PCB holder for the board, and a hot air station for rework, and the bench works as one system.

Check the 32 mm column and your microscope head holder before you buy. Match those two and the RF-FO22 slots straight into your existing setup. It suits repair shops, service centers and training institutes that run microscopes every day.