Professional Phone Repair Blade Set RF-HD12A

Name: Professional Phone Repair Blade Set RF-HD12A
SKU: RF-SD197
Price: 1200 PKR
Availability: InStock

RF4 RF-HD12A Blade Set with Handle

₨1,200

RF-HD12A Blade Set for Phone Boards

The RF4 RF-HD12A pairs a handle with repair blades for the jobs that slow down every phone board repair: lifting shielding covers, scraping glue, and opening devices. You get one dedicated tool for dead phone boards, charging issue repairs, and display problem teardowns, instead of forcing tweezers into work they handle badly. RF4 Tools Pakistan lists it for technicians who want a clean, accessible board before IC change karna or reflow. Keep it on your repair bench next to your hot air station and PCB holder.

Weight

0.05 kg

10 in stock

Professional Phone Repair Blade Set for Shield Cover and Glue Work

The RF4 RF-HD12A is a professional phone repair blade set with handle. It covers the scraping and lifting jobs that come before every serious board repair. RF4 positions it for shielding cover removal, glue scraping, and disassembly. If your bench sees dead phone boards, hang on logo faults, and charging issue repairs every day, a dedicated blade and handle keeps that prep work off your tweezers and screwdrivers.

Where the RF-HD12A Fits in Your Repair Workflow

Every hardware fault repair starts with access. You open the phone, lift the board, remove the shielding cover, and clear glue around the chips you plan to touch. The RF-HD12A covers the middle of that sequence. You pick it up once the board sits secure and put it down before you reach for the hot air station or soldering iron. A clean area around the CPU, eMMC, or power IC makes IC change karna faster and lowers the risk of nudging a neighbouring component. Technicians who rush this stage pay for it later with lifted pads and messy reflow results.

Phone Shielding Cover Removal Tool Use

RF4 aims this set at a familiar workshop frustration: rough edges when you take off shielding covers. Rough edges leave bent shields that no longer sit flat and glue lumps that block clean access. A blade on a proper handle gives you a steady, controllable edge instead of an improvised tool.

Work slowly and keep the blade angle low. Soften stubborn glue with controlled heat where the job needs it, then scrape in short, deliberate passes. Put the board under a microscope so you see exactly what you remove. Clearing glue from around ICs also removes the residue that traps flux and moisture, which matters before jumper lagana, reballing, or any rework on a dead phone.

Handle Control and Bench Safety

The set gives you a blade mounted in a handle, so you hold one tool instead of pinching a bare edge between your fingers. A fixed grip gives you better control over pressure. You push where you need to push and stop where you need to stop. Keep the cutting edge away from flex connectors and small components, and never scrape toward your free hand. Rest the board in a PCB holder so it stays still while you work.

Building a Complete Bench Around It

Pair the RF-HD12A with a PCB holder to lock the board, a microscope to inspect the area, and a hot air station or soldering station for the rework itself. A multimeter helps you check for shorts on a dead phone before you scrape or heat anything. Once the board is clean and you move to chip-level work, add a reballing kit. When the job shifts to flashing or data recovery, ISP pinout tools, eMMC programmers, UFS adapters, and test boxes take over from the blade.

Do not confuse the RF-HD12A with the RF-HD12B. The RF-HD12B is a separate RF4 ceramic scraper head designed for scraping solder paste off stencils. The RF-HD12A is the blade-and-handle set for shield covers, glue, and disassembly. Choose by the job in front of you.