RF4 RF-GR3 Rechargeable Electric Glue Remover

RF4 RF-GR3 Professional Electric Glue Remover for LCD Screen Work

After you separate an LCD screen, glue residue stays on the frame and the glass. Scraping it off by hand burns time and risks scratches. The RF4 RF-GR3 is a professional electric glue remover built for this one step. Its 8000 RPM output clears stubborn residue fast, so your screen refurbishing bench keeps moving and your finished screens look clean.

Speed Control for Different Glue Types

The RF-GR3 gives you four speed levels, and indicator lights show the active level. Surface glue, hard glue, OCA glue, and original glue all behave differently under the tool. Start at a lower level on thin residue near edges. Move up when you reach thick, hardened glue. This control keeps you in charge of the job instead of fighting the tool. At 8000 RPM, the motor clears residue that would take much longer by hand.

Type-C Charging for Cordless Work

The RF-GR3 is rechargeable and charges through a Type-C port. You skip the cord on your bench and use a charging cable you already own. RF4 also lists the RF-GR3S, which adds a charging base for smart charging and storage. Check which version you order, because the base belongs to the RF-GR3S option.

Where It Fits in Your Repair Workflow

Glue removal sits between screen separation and screen reassembly. You lift the glass with your hot air station or screen separator, clean the frame with the RF-GR3, and inspect the surface under your microscope. Then you laminate with fresh OCA. A clean frame helps the new screen sit flat. If you handle display problem jobs every day, this tool removes one of the slowest manual steps in the process.

Keep your PCB holders and other bench tools within reach while you work. Hold the frame firmly, work in short passes, and check progress often. The tool suits repair shops, refurbishing setups, and service centers that process screens in volume.